Search found 41 matches

by whoiswei
Wed Nov 11, 2026 11:00 am
Forum: General Holography
Topic: Possible inexpensive light meter
Replies: 7
Views: 8766

Re: Possible inexpensive light meter

each probe may be different That is indeed the problem. I did some testing today, and this meter doesn't seem to work for testing laser power. The LUX probe has a large diameter, and if I reduce the aperture to 3.5mm (with a piece of electrical tape) and use the above calculation for 488nm, it does...
by whoiswei
Wed Nov 11, 2026 11:00 am
Forum: General Holography
Topic: Possible inexpensive light meter
Replies: 7
Views: 8766

Re: Possible inexpensive light meter

each probe may be different That is indeed the problem. I did some testing today, and this meter doesn't seem to work for testing laser power. The LUX probe has a large diameter, and if I reduce the aperture to 3.5mm (with a piece of electrical tape) and use the above calculation for 488nm, it does...
by whoiswei
Wed Nov 11, 2026 11:00 am
Forum: General Holography
Topic: Possible inexpensive light meter
Replies: 7
Views: 8766

Re: Possible inexpensive light meter

each probe may be different That is indeed the problem. I did some testing today, and this meter doesn't seem to work for testing laser power. The LUX probe has a large diameter, and if I reduce the aperture to 3.5mm (with a piece of electrical tape) and use the above calculation for 488nm, it does...
by whoiswei
Wed Nov 11, 2026 3:36 am
Forum: General Holography
Topic: Possible inexpensive light meter
Replies: 7
Views: 8766

Re: Possible inexpensive light meter

It is indeed feasible, but you need an optical power meter that can accurately measure the corresponding wavelength band or a laser with known power to calibrate it. The coefficients of each probe may be different But you already have an accuracy, why bother with an inaccurate one( https://www.bilib...
by whoiswei
Fri Nov 06, 2026 3:37 pm
Forum: General Holography
Topic: The PL530 Temperature Control and Drive System is now officially open-sourced!The repository can be found at: https://gi
Replies: 1
Views: 157

The PL530 Temperature Control and Drive System is now officially open-sourced!The repository can be found at: https://gi

The repository can be found at: https://github.com/whoiswei114514/PL530-TEC/. I'm not entirely sure which forum section this is best suited for, but it's genuinely very useful, isn't it? It supports temperature tuning via a WebUI, but for other parameters, you still have to manually tweak the potent...
by whoiswei
Wed Sep 30, 2026 2:49 pm
Forum: Beginning Holography
Topic: Problems with Holograms and Bayfol HX200
Replies: 8
Views: 344137

Re: Problems with Holograms and Bayfol HX200

In addition, I don’t think the presence of the film membrane has much to do with the lack of imaging either, because a friend of mine has quite a few of these polymer films and gave me some. After our tests, this thing can still record a hologram even when it is just bent like that; it’s just that t...
by whoiswei
Wed Sep 30, 2026 2:39 pm
Forum: Beginning Holography
Topic: Problems with Holograms and Bayfol HX200
Replies: 8
Views: 344137

Re: Problems with Holograms and Bayfol HX200

Actually, I don’t entirely believe this is related to the coherence length of the laser. I once bought a batch of holographic plates similar to the one in the picture. Their emulsion was pink, just like that of the HX200 in the picture, and under 532 nm and 488 nm laser illumination they produced or...
by whoiswei
Sun Sep 13, 2026 12:21 pm
Forum: DCG
Topic: Strange silver DCG hologram
Replies: 6
Views: 27120

Re: Strange silver DCG hologram

I have used 12ml of 5% potassium dichromate with 6 grams gelatin (exposed at 488nm), and have not seen silver/white holograms. I doubt that the silver/white (a very broadband result?) was caused by the film formula. Rather, I think it's likely due to the processing or other factors. I was not able ...
by whoiswei
Sat Sep 12, 2026 10:31 pm
Forum: DCG
Topic: Strange silver DCG hologram
Replies: 6
Views: 27120

Re: Strange silver DCG hologram

I have used 12ml of 5% potassium dichromate with 6 grams gelatin (exposed at 488nm), and have not seen silver/white holograms. I doubt that the silver/white (a very broadband result?) was caused by the film formula. Rather, I think it's likely due to the processing or other factors. I was not able ...